These are simple user guides for unpacking, assembling and operating your Seradisc Filter.

unpacking the box

The kit includes:
1 x Filter Barrel  |  16 x Filter Discs  |  2 x Retainers  |  2 x 2” BSP Adaptors | 1 x Flexible Coupling | Instruction Manual

Optional extras
Stainless Steel Protector Guard and Float  |  Pack of 16 Additional Discs

assembling the filter

Fully assembled and ready to go in a couple of minutes.

Don’t forget you can add additional discs to create finer screen filtration.

easy to fit

The flexible coupling (supplied with the kit) is secured in place with 2 Jubilee Clips.

adding a protective guard and float

Adding the protective cage and float couldn’t be simpler. Just take off the Adaptor that butts up aginst the shoulder on the barrel, slide on the cage and replace the Adaptor.

variable grade screening

Seradiscs include integral ‘springs’ which separate the discs which allows them to be compressed for variable grade screening. The standard 16 disc filter will screen particulates of  5mm and above. By adding more discs you can vary the screen grade. For example if you add more discs to make a maximum of 42 discs, the filter will screen particulates of 0.1mm and above. And you can grade the screen to sizes in between.

easy clean

The Seradisc Filter is incredibly easy to clean. Just fan the discs and most of the debris will just drop out. Watch how easy it is for one of our customers - he just plunges it into a bucket of water a few times and job done!
Since using Seradisc Filters, Charlie has "not had one pump breakdown!"

go to the Seradisc Filter shop

© copyright 2017 Water Powered Technologies Ltd

registered in England and Wales no. 07450495